Thermal film for imagesetters
Thermal Film is an economical solution for screen, flexo, and gravure shops wanting to eliminate inkjet inks, toners, or chemistry. No harmful chemicals or processing are needed.
​
Our thermal film is a specially coated polyester film that works great for Screen, Flexo (Flexography), Etching, and Gravure printers. The film is not light-sensitive like other graphic art film. When the imagesetter applies heat to the film, the reactive layer turns black and creates the image – no messy toners, dyes, inks, or transfers are used.
• .005” thickness for better handleability
• Lays flat before and after exposure
• Dimensionally stable for accurate registration
• Light safe
• Produce dark films with density above 4.0 using TS film
​
If you have questions about the different types of films listed below, please contact us.
Liberator XE Film
Thermal Film SPx – 18.25 inch x 200 feet
Thermal Film SPx – 24 inch x 200 feet
Thermal Film SPx – 28.5 inch x 200 feet
Thermal Film XP – 36 inch x 200 feet
Thermal Film XP – 42 inch x 200 feet
Thermal Film XP – 54 inch x 200 feet
TechStyler Film
TechStyler Thermal Film TS – 14.25 inch x 200 feet
TechSetter2 Film
TechSetter2 Thermal Film TS – 14.25 inch x 200 feet